Wire Woven Coffin Cabochon Pendant Tutorial (Flame, Figure-8 & Byzantine Weaves)

If you’re ready for a spooky yet elegant wire weaving project, this wire woven coffin cabochon pendant tutorial is for you.

In this step-by-step guide, I’ll walk you through creating a secure woven bezel using some of the most popular wire weaving patterns: the Flame Weave, the Figure-8 Weave, and even touches of the Byzantine Weave.

This project is beginner-friendly but also exciting for intermediate weavers who want to practice new textures and techniques. By the end, you’ll have a striking pendant that’s perfect for gothic jewelry lovers or anyone who enjoys unique statement pieces.

And if you’d like to take your skills even further, don’t miss my Elvira Tutorial, available exclusively in the Artisan Tutorial Vault or as a stand-alone download.

A quick thank you to Casdans for supplying the beautiful coffin cabochons I used here. They’re one of my go-to sources for high-quality stones, cabochons, and beads.

Materials for a Wire Wrapped Coffin Cabochon

• Coffin cabochon (I used one from Casdans)

• 20-gauge round wire (dead-soft): 5 pieces

  • Length tip: Measure around the cabochon, then add 8 inches for smaller stones (20mm+) or 10 inches for larger stones (30mm+).

• 28-gauge round wire (dead-soft): 15–20 feet

Tools Needed

• Chain nose pliers

• Round nose pliers

• Flush cutters

• Ruler

• Sharpie

• Tape

Step-by-Step Wire Weaving Instructions

1. Measure & Mark Your Wires
   Wrap tape around the coffin cabochon to measure its perimeter. Mark the bottom edges, center, and top meeting point.

2. Cut the Base Wires
   Use your measurement to cut five pieces of 20-gauge wire. These will form the structural frame of your pendant.

3. Weave the Center Together
   Begin weaving the wires at the center to create a strong foundation for the bezel.

4. Add the Flame Weave
   On the sides, use the Flame Weave to create a decorative, textured border. This weave not only looks beautiful but also helps hold your stone securely.

5. Set the Coffin Cabochon
   Carefully wrap the wires around your stone, adjusting tension so the cabochon sits snugly in the woven bezel.

6. Form the Bail
   Gather the wires at the top and begin to separate the wires. Weave the front two wires using the Figure-8 Weave to create the bail. Have 4 wires off to one side and 3 off to the other.

7. Add Decorative Accents
   Finish by weaving accents down the front and sides using bare wire, coils and the Byzantine weaves.

Why You’ll Love This Project

• Learn three essential wire weaving techniques (Flame, Figure-8, Byzantine).

• Practice bezel setting for uniquely shaped stones.

• Create a one-of-a-kind gothic-inspired pendant that makes a bold statement.

Next Steps in Your Wire Weaving Journey

If you enjoyed making this coffin cabochon pendant, I think you’ll love my Elvira Tutorial. It’s a more advanced design that uses similar techniques to create a show-stopping pendant.

You can access it inside the Artisan Tutorial Vault (a library of wire weaving tutorials) or purchase it separately if you prefer.

Final Thoughts

That’s it! Your coffin cabochon pendant is complete! This project is a fantastic way to expand your wire weaving skills while creating a bold, gothic-inspired design.

Have any questions about this tutorial? Leave them below in the comments section!

Until next time, happy weaving!

Ellie

Please note that this article contains affiliate links which earn me a small commission when you make a purchase. This helps me to continue to create free content for you, so thank you!